MiWire Pro is configuration of two RouDems and a control unit that distributes the incoming network traffic. The two RouDems are a combination of an auto-rotating, directional antenna, and a modem. MiWire Pro solution provides Internet connection via the mobile network and offers network redundancy.
The connection to the Internet is obtained via a data SIM card, which you insert into the RouDems. The RouDems are prepared for outdoor installation at the highest spot possible on a standard antenna pole and the control unit must be installed indoors. Additionally, the RouDems has an integrated WiFi router and battery giving over 8 hours of operation.
Find out what it takes to get online with MiWire RouDem.
RouDem is a wireless broadband solution and therefore for the RouDem to receive signal you must insert a SIM card with data. The data subscription is a side purchase to the solution. To gain the best speed with RouDem it is essential to choose a data subscription from that operator who has the best coverage conditions on your location. For the Pro solution you need two SIM cards, one for each antenna. Read more about the data subscriptions in our FAQ.
The package content DOES NOT include cables. The length of the cables depends on the location for installation. You need two cables, one for each antenna. Download the product sheet below to get an overview of the system configuration.
Network cable type: Cat6 or above, UV- and water resistant, shielded, grounded.
Connector 1 & 2: RJ45 (male)
The RouDems is designed with a mounting bracket that interfaces to a pole of Ø38mm/1.5” (outer diameter). The mounting should take place at the highest spot possible and where possible with a good all-round view.
In some cases, the WiFi signal from the RouDems are not strong enough to cover the needs if the WiFi signal must pass through walls and other signal noise reducing items. Each RouDem will create its own WiFi hotspot. You can connect the MiWire Pro solution to your existing WiFi system or a switch via the LAN port in the control unit. In that way you can easily distribute the WiFi signal to where it is needed.
MiWire Pro is a premium plug-n-play wireless broadband solution for users who wants to gain better reach and higher speed based on the LTE network. This solution is a fixed installation that performs best at the edge of the mobile network coverage. This solution is for businesses and people who are dependent on constant broadband. With two units, you gain a higher speed Internet connection and better capacity.
MiWire’s solutions contain patented, auto-rotating, directional antennas that points to the most optimal operator base station, controlled by our embedded software algorithm. MiWire’s intelligent, high-gain antennas not only automatically locate the best operator base station. Our solutions also scan and memorize the network infrastructure through an advanced, patented software algorithm to ensure maximum data speed, even when changes in the network infrastructure is made. MiWire Pro is especially a reliable solution, when changes in the network occur, as the two units can be used to achieve redundancy.
We have developed plug-n-play solutions in which installers do not need to have knowledge of the network infrastructure in order to install. MiWire ensures high performance data speed – wherever you are.
2 x Lan interface
2 x Micro SIM card port
Frequency bands: 800, 900, 1800, 2100, 2600 MHz
4G LTE: Carrier aggregation
If there are no dealers in your area, please contact us.